Low temperature storage tanks themselves can only store liquid media. In order to convert liquid oxygen, liquid nitrogen, and liquid argon into gaseous form for supply to production lines, vaporizers must be used. Many customers neglect the selection of vaporizers when purchasing liquid oxygen storage tanks, liquid nitrogen storage tanks, and liquid argon storage tanks, resulting in insufficient gas supply, ice blockage, and other problems. The function of a vaporizer is to use ambient air heat exchange to heat and vaporize low-temperature liquid gas, and output a gaseous medium at room temperature. The commonly used air-cooled vaporizer relies on natural air heat exchange and operates without additional energy consumption, making it the mainstream style for low-temperature storage tank matching; For factories with large fluctuations in gas load and low-temperature environments in winter, a water bath vaporizer can be used as a supplement.
The core of vaporizer selection is to match the maximum hourly gas flow rate with the storage tank volume.. For example, when matching a vaporizer with a liquid nitrogen storage tank, it is necessary to match the peak gas consumption of the quick freezing production line; The liquid argon storage tank is equipped with a vaporizer to match the welding workshop's simultaneous start-up load; The liquid oxygen storage tank is equipped with a vaporizer to meet the continuous oxygen supply demand. If the specifications of the vaporizer are too small, the supply of gas during peak hours cannot keep up, the pressure is unstable, and it affects production. The complete chain of the low-temperature gas supply system: low-temperature storage tank (liquid oxygen/liquid nitrogen/liquid argon storage tank) → emergency shut-off valve → pressure regulating valve group → vaporizer → stabilizing pipeline → gas consumption point. The entire system requires unified design of pressure, pipe diameter, and safety interlocks, rather than simply combining storage tanks and vaporizers together. Fast and Easy Cooling Small Gas Supply Device, belonging to a complete set of small-scale low-temperature storage tank solutions, suitable for small and medium-sized gas customers, with smaller footprint and convenient installation. Liaoyang Jinding Low Temperature Equipment can provide an integrated complete set of solutions, including liquid oxygen storage tanks, liquid nitrogen storage tanks, liquid argon storage tanks, LNG storage tanks, liquid carbon dioxide storage tanks, equipped with air temperature vaporizers, pressure regulating levers, and quick and easy cooling equipment. The design scheme is based on the on-site climate, peak gas consumption, and pipeline distance. The equipment is manufactured according to pressure vessel standards and comes with installation guidance and inspection materials. When planning the gas supply system for enterprises, it is recommended to coordinate the planning of storage tanks, vaporizers, valve groups, and pipelines, and have the manufacturer calculate the load uniformly to avoid equipment parameter mismatch and ensure the stable and safe operation of the entire gas supply system.